For plant, facility and site managers

Drone exterior cleaning for industrial and energy facilities

Industrial sites have the largest surfaces and the least convenient access: long metal walls, acres of roof and tall structures nobody wants to scaffold. A tethered drone cleans them from the ground, and the work is done by a local crew.

Published rate: $0.12–$0.25 per sq ft, fixed price after a free site survey.

See your price, then book a free site survey

Free site survey, then a fixed price. No scaffolding, no lifts, no minimum charge.

FAA Part 107 · $1M/$2M liability · $5M umbrella · published national rate

Published rate: $0.12–$0.25 per sq ft, fixed after a free site survey. Add a size to see the total.

We call or text the same business day to book the survey.

By submitting your phone number you agree to receive texts from Exterior Drone Washing about your request. Msg & data rates may apply. Reply STOP to opt out.

Florida project · delivered by Vista Drone Cleaning, run by our founders

Miramar Centre II, Miramar, FL

  • 48 hours to complete the entire building
  • ~29% below traditional pricing for the same scope
  • Zero lifts or scaffolding on site
  • Minimal disruption to tenants and daily operations
See the documented projects

Fully Insured

$1M/$2M liability · $5M umbrella

FAA Compliant

Part 107 Certified

Commercial Projects

Up to 320 ft by drone

Quick answer

Drone cleaning on an industrial site, in short

Industrial drone exterior cleaning is priced at $0.12–$0.25 per square foot, and large jobs get lower rates: $0.12–$0.20 at 40,000 sq ft and up, easing further on very large surfaces. The price is fixed after a free site survey, with no minimum charge and no travel charge. A tethered drone washes metal wall panel, concrete and roofs from the ground, reaching up to 320 ft per staging position, so no scaffolding or lift is brought on site.

Price
$0.12–$0.25 per sq ft, lower on large jobs
Large surfaces
$0.12–$0.20 at 40,000 sq ft and up
Reach
Up to 320 ft (about 29 stories) per staging position
Access equipment
None brought on site
Crew
Local to the area, no travel charge
Paperwork
Certificate of insurance with every proposal
Documented project · Florida

A full exterior wash with drone, poles and ground crew

Workspace Property Trust · Miramar, FL, a four-story Class A office building in Miramar Centre Corporate Park. Delivered in Florida by Vista Drone Cleaning, the Florida company run by our founders.

A prospective tenant walkthrough was booked for Thursday and the job was only confirmed on Monday afternoon. Lifts and scaffolding could not clean the building in the time available, and nothing could block the entrances or take over the parking lot.

The entrance keystone at Miramar Centre II before cleaning, streaked with runoff stainingBefore
The same entrance keystone after cleaning, the most visible piece of the facade restoredAfter
Miramar Centre II: the entrance keystone, the first thing a tenant sees, before and after. Delivered in Florida.
48 hours
to complete the entire building
~29%
below traditional pricing for the same scope
Zero
lifts or scaffolding on site
Minimal
disruption to tenants and daily operations
Scale

Priced for surfaces measured in acres

Industrial work is where the rate falls furthest. The published range is $0.12–$0.25 per square foot, narrowing to $0.12–$0.20 at 40,000 sq ft, and the low end keeps easing as the surface grows. A 100,000 sq ft job runs $10,364–$20,000, computed from the pricing model.

The price is fixed after a free site survey that measures every wall and roof plane, so the purchase order is issued against a number that does not change.

Access

No scaffold against the building, no lift on the apron

Bringing access equipment onto an operating site means safety orientations, exclusion zones and equipment standing idle around it. The drone is flown from the ground and reaches up to 320 ft from each staging position, and taller structures are worked by staging from podiums, setbacks or the roof. Nothing is erected against the asset.

Surfaces that are better cleaned from the ground, such as slabs, loading aprons and the lower run of a wall, are washed by the ground crew with water-fed poles and heated water in the same visit.

Typical surfaces

  • Metal wall panel and standing-seam roofs
  • Concrete and precast walls
  • Low-slope membrane roofs
  • Solar arrays on roofs and canopies
  • Parking structures and paved yards, by ground crew
Working on your site

Working under your site's safety rules

${CREW_STRUCTURE_SENTENCE} Your site's orientation, work permit and escort requirements are raised at the free site survey so the schedule is built around them.

Rinse water is contained and recovered wherever the local storm-drain rule requires it, and the containment method is written into the proposal.

Published pricing

What a large industrial surface costs to clean

The published rate is $0.12–$0.25 per square foot of surface cleaned. Bigger jobs get lower rates. The totals below are computed from the pricing model at the size shown.

Commercial rate

$0.12–$0.25 / sq ft

Fixed price after a free site survey. No minimum charge.

40,000 sq ft of wall or roof

$4,800–$8,000

Computed from the model at this size.

100,000 sq ft of wall or roof

$10,364–$20,000

Computed from the model at this size.

20,000 sq ft of wall or roof

$2,400–$4,500

Computed from the model at this size.

Every job is a fixed price after a free site survey, with no minimum charge and no travel charge.

No work is scheduled in freezing conditions, in any state.

Rates shown are our published national rates. Every job is a fixed price after a free site survey.

Nationwide

Where we work

Every state, the same standard: tethered Lucid Bots Sherpa drones, heated soft-wash chemistry with a 0 TDS pure-water rinse, FAA Part 107 crews and $1M/$2M liability coverage. Each job is handled by a local crew, with a fixed quote after a free site survey and no travel charge. Florida projects are handed to Vista Drone Cleaning, the Florida company run by our founders.

In New York, drone flights are scheduled around the city's takeoff and landing permit process, and water-fed pole and ground crews cover work that cannot wait for a permit.

Every state we serve

Featured markets: Manhattan, NY, Los Angeles, CA, Chicago, IL, Washington, DC, Houston, TX, San Francisco, CA, Boston, MA, Dallas, TX, Detroit, MI, Columbus, OH, Cleveland, OH, Milwaukee, WI.

Frequently asked questions

How much does it cost to clean a warehouse or plant exterior by drone?

$0.12–$0.25 per square foot of surface cleaned, with lower rates on large jobs. A 100,000 sq ft surface runs $10,364–$20,000. The price is fixed after a free site survey, with no minimum charge.

Do you work on sites outside major cities?

Yes. Each job is handled by a local crew, with a fixed quote after a free site survey and no travel charge. Florida projects are handed to Vista Drone Cleaning, the Florida company run by our founders.

How high can the drone clean on a tall structure?

Up to 320 ft, about 29 stories, from each staging position. Taller structures are worked by staging from podiums, setbacks or the roof.

Can your crew work under our site safety rules?

Crews are local to the area they work in and are company employees, not franchisees or licensed operators; every crew flies the same Lucid Bots Sherpa drones, which is how the same equipment, chemistry and price sheet can be promised in every state. Your site's orientation, work permit and escort requirements are raised at the free site survey so the schedule is built around them.

Is the work insured?

General liability of $1M per occurrence and $2M aggregate, a dedicated drone (UAS) liability policy, a $5M umbrella over them, and workers' compensation, with a certificate of insurance delivered with every proposal. Pilots hold FAA Part 107 certificates.

Get a fixed price for your site

Send the site address and the surfaces you want cleaned. We survey it for free and reply with a measured scope and a fixed price.

See your price, then book a free site survey

Free site survey, then a fixed price. No scaffolding, no lifts, no minimum charge.

FAA Part 107 · $1M/$2M liability · $5M umbrella · published national rate

Published rate: $0.12–$0.25 per sq ft, fixed after a free site survey. Add a size to see the total.

We call or text the same business day to book the survey.

By submitting your phone number you agree to receive texts from Exterior Drone Washing about your request. Msg & data rates may apply. Reply STOP to opt out.

CallQuoteText Us